DIRECTORS VIEW FINDER, EF, FD AND PL MOUNTS... 3D PRINTED

DIRECTORS VIEW FINDER, EF, FD AND PL MOUNTS... 3D PRINTED

Pre-orders for the 3D printed slates will end in one week! Get you order in before it's too late! On another note....

Available now, for the adventurous.... directors view finder, EF, FD, and PL mount, and sensor frame inserts at http://fuzeti.com/camera.html

The EF and FD mounts themselves are metal and salvaged from old broken 35mm film cameras. The optics from these cameras were then used to make the directors viewfinder. Inserts can be fitted in through the front that basically frames up for the actual sensor size used. So with this directors viewfinder, you can see exactly what you'll see in frame as you would on the camera.

Lens mounts are compatible with Red's DSMC lens mounts, but use on Red's DSMC cameras at your own discretion.

Flange focal distance will land within 0.5 mm short of specification so you can add your own shims to bring it as close as you want. These products are for those who have an understanding of adjusting flange focal distances or happy with close enough for use with our Directors View Finder.