FDC 3D Printed Enclosure


In stock


Timecode Generator Display 3D Printed Enclosure

Ships 2-4 days.

Customize FDC 3D Printed Enclosure
1 x FDC Printed Timecode Generator   + $0.00

* Required Fields

Your Customization
FDC 3D Printed Enclosure
FDC 3D Printed Enclosure

In stock



    Timecode Generator

    The FUZE timecode generator uses a temperature compensated oscillator. The clock has a tolerance of +/-1ppm, capable of achieving an accuracy of less than one frame drift over a 24 hour period. Operating at temperatures from -10 to 60°C while maintaining a stability of +/-1ppm. Right on par with Ambient and Denecke devices. The projected 10-year tolerance of our clock is +/-3.5ppm, a mass improvement over the typical +/-10ppm temperature-compensated quartz crystal over 10 years.


    1/4" TRS Input/Output
    Standard 5-pin Lemo Input/Output 
     •Button to view last clapped time
     •Easy access brightness knob
    Uses four "AA" Batteries
    Easy navigation button to setup time and user data
    USB allows for potential firmware updates 
     •External DC power accepts 5-16V
     •Power and low battery indicator
    Weatherproof (IP55) comes as standard*

     Water Test

    What's Included:

    • 1 x Timecode Generator Display
    • 5-Pin I/O Plug
    • 1/4" Neutrik Plug
    • Anti-Glare display protector (preinstalled) 

    Due to the nature of 3D printing process the finish on the encolsure varies print to print. There will be cosmetic differences from pictures above. 

    *To obtain full seal we highly recommend you use a screw driver to tighten the battery compartment thumb screws.

    More Information
    Weight 1.0 Lbs
    Frame Rates 23.976, 24, 25, 29.97, 29.97 Drop, 30, 30 Drop
    Input/Output 1/4" Phono TRS, Standard 5-Pin Lemo
    Power DC 5-16V, 4xAA
    Dimensions 8.5"W x 6.5"H x 1.5"D
    Related Documents Quick Reference Instructions PDF

    Fuze Ti: FDC Basic Operations on Youtube.

    No Related Posts

    We found other products you might like!